Your cart
There are no more items in your cart
Vital signs monitor with touch screen, 5.0 inch color TFT screen, simple to use, measure data quickly and accurately;
Built-in rechargeable Li-Li battery, up to 15 hours of battery life,
AC and DC power support;
Adjustable audible and visual alarms and sensor off
Portable, compact, easy to carry and operate
Bright and clear 5.0 inch TFT-LCD with touch screen and real-time display
Intelligent measurement of ECG.NIBP.SpO2.PR.PLETH.TEMP
Trend data storage / review up to 129.6 hours and 3888 groups
Storage ECG waveform, each section is 8 seconds, total is 30 sections; NIBP, SPO2, pulse rate and TEMP data sheet review up to 100 groups; which can be printed out through BlueTooth printer connection
Software package for PC utilities for long time monitoring, uploading / reviewing / printing / storing historical data.
Upload history data to PC for review, storage or printing via USB data line connection or wireless BlueTooth
Audible and visual alarm
Built-in rechargeable Li-Ion battery, up to 15 hours of power supply
Backlight can be freely adjusted
To fulfill the Communication function, install the data viewer software on a PC equipped with a printer and connect the monitor to the PC via a USB or wireless BlueTooth cable.
ECG
Input: 3 / 5Connect ECG cable standard AAMI cable connector
Lead Selection: I, II, III
Gain Selection: × 1, × 2, × 4, × 8
Sweep Speed: 12.5 25 and 50 mm / s
Frequency response: No filter: 0.05 ～ 100Hz (-3dB)
Filter: 0.5 ～ 40Hz (-3dB)
Calibration Signal: 1mV square wave
Protection: Against interference electrosurgery and defibrillation
Heart Rate
Measuring Range: 20 bpm to 300 bpm
Resume Time: 1 time per beat
Accuracy: ± 1 bpm
Alarm Mode: Audible and visual alarm
SpO2
SpO2%
Measuring range: 0% ～ 100%
Resolution: 1% (90% ± 99%)
Accuracy: ± 2% (90% ± 99%)
± 3% (70% ± 89%) not specified (0% ～ 69%)
Pulse Rate
Measurement and Alarm Range: 20 ～ 300bpm
Resolution: 1bpm
Accuracy: ± 1bpm
NIBP
Method: Oscillometric
Mode: Auto STAT manual
Measuring interval in AUTO mode: 1 2 3 5 10 15 20 30 45 60 (min)
Measuring period in STAT Mode: 5 min
Cuff Pressure Range: 0 mmHg ～ 300 mmHg
Pulse Rate Range: 30 bpm ～ 250bpm
Measurement Rage: Adult 30 mmHg ～ 255 mmHg
Pediatric 30 mmHg ～ 160 mmHg
Overpressure protection:
Adult 300 mmHg
Pediatric 220 mmHg
Pressure resolution: 1mmHg
SYSTOLIC and DIASTOLIC values measured using this device should be the same as those measured by trained medical personnel using a cuff and stethoscope.
The AVERAGE value measured using this device is equal to that measured using a blood pressure measuring device.
Temperature
Input: Thermosensitive resistor temperature sensor on the body surface
Measuring Range: 0 ℃ ～ 50 ℃
Accuracy: ± 0.1 ℃
Storage and Review
Maximum amount of data: 3888 groups
Maximum Trend Time: Continuous 129.6 hours
Power :
Rechargeable battery 1700mAh ~ 2000mAh.7.2V.
Charge (discharge) ≧ 1000 times.
Charging time: 2 hours
Working operation / relative humidity: 0 ～ 55 ℃ / 10 ～ 80% RH
Storage operation / relative humidity ： -20 ～ 60 ℃ / 10 ～ 90% RH
Power Source
AC power adapter
Input: 100 ～ 240VAC 50 / 60Hz 0.7A
Output: DC 5 V 1.5A
Battery
Rechargeable Li-ion battery 3.7V / 7200mAH
Operating time: 15 hours at full battery capacity.
(Condition: 25 ℃ NIBP working period is 15 minutes)
Recharging time: 10 hours.
Environment
Temperature
Working: 0 ℃ ～ 45 ℃
Transport and Storage: -25 ～ ～ 85 ℃
Humidity
Working: 30% ～ 85%.
Transport and Storage: 30% ～ 95% (non-condensing)
Display Specification
Measurement Display: color TFT-LCD / touch screen
Power supply indicator: two-color LED (red / green)
Charge indicator: One green LED
Size: 209mm × 104mm × 47.5mm
Net Weight: 655g
Monitoring Parameter
Printer (Optional)
Type: micro thermal printer
Printer paper: 58mm thermal paper Roll paper diameter 33mm
Interface: Bluetooth wireless interface
Recording types: Real-time printing and revision data printing
Tap to zoom
